Micronic Filter Cloth, Particle Retention and Flow Rates

Micronic Filtration Cloth

Particle Retention and Flow Rate Data

Plain Dutch Weave Filter Cloth
Particle Retention		Thickness	Weight	Flow Rate Per Square Inch
Microns	Inches	Inches	lbs./sq.ft.	Oil GPM	Fuel GPM	Air SCFM
325	0.0128	0.059	1.03	3.8	8.5	47
295	0.0116	0.048	0.76	3.7	8.3	45
245	0.0096	0.037	0.69	3.6	8.3	44
138	0.0054	0.03	0.52	3.5	7.9	43
102	0.0042	0.021	0.37	3	7.3	38
84	0.0033	0.016	0.27	2.5	7.2	35
82	0.0032	0.02	0.38	1.6	4.5	27
64	0.0025	0.012	0.22	1.9	6.2	33
62	0.0024	0.016	0.28	1.3	4.4	26
49	0.0019	0.013	0.23	1	4.2	24

Twilled Dutch Weave Filter Cloth
Particle Retention		Thickness	Weight	Flow Rate Per Square Inch
Microns	Inches	Inches	lbs./sq.ft.	Oil GPM	Fuel GPM	Air SCFM
98	0.0039	0.035	0.85	1.12	4.1	19
90	0.0035	0.027	0.56	1.20	4.2	21
74	0.0029	0.028	0.61	1.05	3.1	17
69	0.0027	0.028	0.64	0.90	3.0	16
46	0.0018	0.022	0.59	0.45	2.6	14
41	0.0016	0.012	0.26	0.63	4.1	21
36	0.0014	0.014	0.36	0.24	2.1	12
32	0.0013	0.011	0.25	0.31	2.4	14
17	0.0007	0.006	0.16	0.12	1.89	11
10	0.0004	0.006	0.16	0.10	1.66	9.2
5	0.0002	0.003	0.10	0.06	1.12	7.8

Twilled Square Weave Filter Cloth
Particle Retention		Thickness	Weight	Flow Rate Per Square Inch
Microns	Inches	Inches	lbs./sq.ft.	Oil GPM	Fuel GPM	Air SCFM
145	0.0057	0.033	0.53	4.7	10.1	50
141	0.0055	0.018	0.28	7.2	12.3	84

Filter Cloth Micron Rating:

This data was determined using the "bubble point" test method. One micron equals 0.00003937" or 0.001mm.

Filter Cloth Flow Rate Data:

This data was based on a test sample one square inch in area.

Oil - MIL-H-5606-B @ 80�F (viscosity 90 SSU) at 1 psid.

Fuel - MIL-F-7024-A, Type II @ 78�F (viscosity 35 SSU) at 1 psid.

Air - Tested @ 75�F at 1 psid.

Sales and Service 360.835.7507

By using this website, you are agreeing that you have read and accepted the Terms of Use Agreement
If you do not agree to these terms, please do not use this website.
	Copyright � 2009 wire-cloth.com All Rights Reserved.

Last Revised 01/04/2012